This goal conforms to BS 8462, no anchor weights required.
One of the preferred options in 2003 FA Guidelines.
Ideal 5-A-Side training goal, easily folded for storage.
Ideal for synthetic surfaces, this folding goal can be easily manoeuvr

These products conform to BS 8462.
White, heavy duty polyethylene.
4.88m x 1.22m
IP.FN-5 £42.50
3.66m x 1.22m.
IP.FN-3 £40.23

Aluminium 5-A-Side Goal Posts
This product range, once anchored, conforms to BS 8462. More info

Designed for indoor use.

This product range, once anchored, conforms to BS 8462.
Portable, freestanding type.
Epoxy powder coated white.
Folding net supports.
Detachable bottom back ba

To suit FB.FP-1, 4 and 7.
Easy to fit.

This product range once anchored conforms
to BS 8462.
Spring loaded side frames for easy folding
and storage, complete with back bar.
Robust flip over wheels.
Large rubber feet on net supports to
protect floor.
1.22m

This product range conforms to BS 8462. Made from heavy duty 2.6mm gauge tubular steel.

This product range conforms to BS 8462.

Made from extra heavy duty 4mm thick polypropylene braid.
Mesh size 120mm.
Available in white, green, blue, yellow or red.
Please state colour and top/bottom run back of net support when ordering.

Simple press together nylon velcro net straps to hold net in place.
Pack of 24.

Manufactured from 8lbs density chipfoam interior with overlapped PVC covering and non-slip latex bottom.
Mats are 30mm thick with tapered 10mm thick front lip to prevent tripping.
Mats extend 1.05m out in front of goal and 150mm behind goal line

Available in a full range of colours.
Wheealway, interlocking boards form a solid wall.
No floor sockets required.
Standard boards are 2500mm wide x 1200mm high.
Laminate or MDF finish.
Easily manoeuvred with a heavy duty wheeling

Quotations for supply and installation based on a site visit or Architect’s plans.
Manufactured from timber, laminated face and fitted with wheels for ease of movement.
Units, 2.44m long x 1.22m high, are held in place by support posts locatin

18 panel.
Hand-stitched.
Indoor match or training ball.

Nylon wound and moulded construction.
Short felt covering.

18 panel.
Yellow melton cloth.

Steel.
Consisting of ground socket, internal linkage, 34mm dia. capacity ‘U’ brackets for securing to base rail or net support of goal, and snap connector for quick release should goals require moving.
All zinc plated.

Similar to anchor for grass pitches but designed to be driven into the tarmac surface.
Supplied complete with hole pre-former.
All zinc plated.

Specifically designed for installation in synthetic pitches.
Galvanised steel construction with stainless steel floor plate and flip up anchorage point to allow easy goal post attachment.
Anti-tamper flush fitting lid requires Allen key (suppl

Complete with eyebolt. 2 no. carbine clips.
3m length of chain, other lengths available.
Suitable for all UK goals.

Consists of 1no. U clip, 1no. bolt and
1no. three link welded chain.